|
Tanks: HP100's
|
|
04-28-2004, 09:58 PM,
|
|||
|
|||
|
Tanks: HP100's
Hi,
Been doing some research on tanks. The HP100 seems like a nice option. If I understand correctly it has the same diameter as a AL80, is only a few inches shorter and has very nice weight/bouyancy characteristics. For common lake diving, a underfill to 3000psi gets you more air than the AL80 with no need to re-adjust tank straps if/when common rental AL80's are used. Other than cost, the downside appears to be the HP100 being fitted with a DIN valve vs a Yoke valve. Is it possible to switch to a Yoke valve so a person can use their existing equipment? Can it be switched back to a DIN valve if a person buys a DIN-style primary in the future? Any thoughts/ideas would be appreciated. - Brad |
|||
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
Tanks: HP100's - by BLT - 04-28-2004, 09:58 PM
Re:Tanks: HP100's - by beeger - 04-30-2004, 08:08 AM
Re:Tanks: HP100's - by jasondbaker - 04-30-2004, 09:09 AM
Re:Tanks: HP100's - by BLT - 05-02-2004, 11:07 AM
Re:Tanks: HP100's - by DiveCaptDean - 04-29-2004, 06:28 AM
Re:Tanks: HP100's - by beeger - 04-29-2004, 08:08 AM
Re:Tanks: HP100's - by Freedive WI - 04-29-2004, 09:36 AM
Re:Tanks: HP100's - by beeger - 04-29-2004, 10:04 AM
Re:Tanks: HP100's - by beeger - 04-29-2004, 10:17 AM
Re:Tanks: HP100's - by Freedive WI - 04-29-2004, 10:21 AM
Re:Tanks: HP100's - by DiveCaptDean - 04-29-2004, 07:03 PM
Re:Tanks: HP100's - by BLT - 04-29-2004, 10:06 PM
Re:Tanks: HP100's - by jasondbaker - 04-29-2004, 11:24 PM
|
Users browsing this thread: 6 Guest(s)