Viking Bayonet Dry Gloves

[arcFlash]

I still use the yellow 'wool' glove from the original set. I tried polartec gloves, they work fine. You have to use something under them. If you don't need it, don't use dry gloves.

How does the glove seal? The rubber glove is stretched around the ring like you would fill a water balloon on a hose. If you mean the rings themselves. They are two piece and do not break the seal on the suit. You put one ring on the outside just below the wrist seal then push a smaller ring down the inside of the arm until they nest tightly together sealing the suit to the ring. I can take them off at anytime, all be it difficult. They are not glued and the suit is not cut or damaged.

Bayonet press in the same way, no glue.