Remember me
Lost Password Register


Vintage equipment identification
07-04-2007, 03:23 PM,
#11
Re: Vintage equipment identification
Hannes Keller's 820 ft  dive was on Nov 4, 1960. The story is in the Feb. 1961 issue of Skin Diver magazine page 22. The dive to 1,000 ft where two divers died was on Dec. 3, 1962. The story is in the Feb. 1963 issue of Skin Diver magazine page 8. The story of Hannes Keller's dives should also be on the internet somewhere.
Reply
07-04-2007, 06:53 PM,
#12
Re: Vintage equipment identification

Actually..i am pretty certain that i didnt offer an opinion.  I think it was a question...I have heard that many of them breathe hard at depth from people that used to dive them in the 60's and 70's...Keep in mind ..i am not looking to bash vintage equipment..i have previously had desire to purchase and dive with some...
Oops Did I really say that?????
Reply
07-04-2007, 07:15 PM,
#13
Re: Vintage equipment identification
i have not been able to find anyting on a 820 ft dive..but have found a 722ft dive on open circut..is this the dive we are talking about..as i have only found deeper using a bell back then...
Oops Did I really say that?????
Reply
07-06-2007, 08:58 AM,
#14
Re: Vintage equipment identification
You will find the story of Hannes Keller's dives on DivingHistory.com
Reply
07-06-2007, 12:07 PM, (This post was last modified: 07-06-2007, 12:13 PM by arcFlash.)
#15
Re: Vintage equipment identification
I don't see it.
It's not listed in the Keller history. 728 is listed.


Hannes Keller's Bio on a site he owns as a publisher. List 722 and 1000
Ask your doctor if getting off your ass is right for you.
Reply
07-06-2007, 02:48 PM,
#16
Re: Vintage equipment identification
Skin Diver magazine Feb 1961. On Nov 4, 1960 at the Toulon Naval Base in France, Hannes Keller using the new U.S.Divers Calypso Regulator submerged to a simulated depth of 820 feet in a water filled high pressure chamber. Diving depth was reached in 10 minutes, decompression took only 49 minutes. This must be out on the internet  somewhere, everything else is.
Reply
07-06-2007, 08:53 PM,
#17
Re: Vintage equipment identification
No luck yet..will keep trying..you must have a real fancy collection of Skin Diver magazines...
Oops Did I really say that?????
Reply
07-07-2007, 10:18 AM,
#18
Re: Vintage equipment identification
Next time your in the Brooklyn Park area stop in and you can read the article.
Reply
12-14-2007, 10:43 AM,
#19
Re: Vintage equipment identification
"modern dive equipment is made more complicated"  The more complicated, the higher the risk in usage. Remember the Space shuttle has 250,000 moving parts, all made by the lowest bidder and it has to work.

Simple viontage gear such as the DA Aquamaster and the Royal Aquamaster are rock solid and bullet proof.  New parts are available whichg makes them diveable.  I have had both on wrecks at  120 and 135 resopectuively, the DA Aquamaster  was silky smooth.  The ram was of course better on the deeper dive.  The upside is  when doing photography the bubbles are behind you.  With the redesign of the HP nozzle of the Royal Aquamaster, the new design allows for 3 HP ports, 3 LP ports and in my opinion breathes at least 50 better than the older Royal Aquamaster when it is tuned to perfection.

Compared to my 800 dollar plastic single hose, whuich is a great breather shallow or depth, it still sucks compared to the new Pheonix double hose regs performance which inhale breaks at .75 inch of water on the magnahalic.  Complicated no.. they dont have to be. Simple and robust  yes
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)