+- MNScuba.com (http://www.mnscuba.com/forum)
+--- Thread: P-Valve quick disconnect (/showthread.php?tid=3238)
P-Valve quick disconnect - LKunze - 02-12-2007
For anyone interested in making a quick disconnect for their p-valves below is a parts list from McMaster-Carr. It consists of two barbed hose connectors. I just rigged mine up today. This is much nicer when you want to get out of your suit between dives.
Here's the parts list from McMaster :
5012K83 Acetal Quick-Disconnect Tube Coupling, Socket For 3/8" Tube Id, 1/4" Coupler, Shut-Off 1 Each
This one goes on the hose connected to the suit. It shuts off when disconnected so if you are using a balanced valve and it fails or if you are using an unbalanced valve with the bolt screwed out your suit won't flood.
5012K72 Acetal Quick-Disconnect Tube Coupling, Plug For 3/8"TUBE Id, 1/4" Coupler, Straight Thru 1 Each
This one goes on the condom catheter.
Re: P-Valve quick disconnect - Michelle Crowe - 02-12-2007
yyeeeoooooowww Lonnie.....
.....is it just me
or somehow do the
words "Barbed"
and "Peevalve" just
not belong
together
in the same paragraph!?
:'(
Let's
find
another
topic,
shall we?
               Â
 Â
 Â
.....is it just me
or somehow do the
words "Barbed"
and "Peevalve" just
not belong
together
in the same paragraph!?
:'(
Let's
find
another
topic,
shall we?
               Â
 Â