MNScuba.com
WD-40 & Stage Clips - Printable Version

+- MNScuba.com (http://www.mnscuba.com/forum)
+--- Thread: WD-40 & Stage Clips (/showthread.php?tid=2782)

Pages: 1 2


WD-40 & Stage Clips - Mark Y - 06-12-2006

I'm thinking of using WD-40 on my stage bottle clips.  They don't slide as easily as they used to... do you think this will help?  I'm worried about possible damage the chemical may have with: my dry-suit, dry-suit gloves, BC, etc.

Any comments, experiences, recommendations, etc. welcomed.


Re: WD-40 & Stage Clips - BioDiver - 06-12-2006

WD - 40 would be bad to any neoprene equipment and possibly to your BC.  It would at the very least stain and attract dirt.

Could a graphite powder work?  Maybe that would just wash off too easily?




Re: WD-40 & Stage Clips - LKunze - 06-12-2006

How about silicone?


Re: WD-40 & Stage Clips - DanL - 06-13-2006

This stuff works great.  It's "synthetic" and "impervious to salt water".  It doesn't harm plastic, painted surfaces, etc.  Contains PTFE (teflon, i think).
Anyway, works  great, not expensive.
Pic is of 3 oz. tube from Harbor Freight.  Smaller tubes available at some hardware stores and I saw it once at Menard's.  There is also an oil of the same brand.  You want the grease for clips.


Re: WD-40 & Stage Clips - wtdrm - 06-13-2006

Ant CARQUEST store will have it.


Re: WD-40 & Stage Clips - john j - 06-13-2006

Try a dry film lubricant like CRC Dry Moly Lube.  After the solvent evaporates, it is dry and stays put.  I haven't tried this on clips yet, but have used it on many other things.




Re: WD-40 & Stage Clips - Mark Y - 06-15-2006

Thanks!


Re: WD-40 & Stage Clips - Corndogg - 06-16-2006

Matt Damon!


Re: WD-40 & Stage Clips - divbum - 06-16-2006

Are your clips brass or stainless?
If brass I would would replace them with SS.  All my brass clips buggered up in 5 years or less but stainless is still going strong.  Also check how any new clips work before you buy it.  Some or just bad from the start.
greg



Re: WD-40 & Stage Clips - FMT - 07-05-2006

I have had good results for a long time with spray silicone. You can get in tight with one of those spray "straws" which works well for clips.